FH SHINER is a natural appearance, solvent and acrylic resin based protective and polisher coating material that designed for concrete and natural stone surface.
- On natural stones, marble, pressed brick, travertine.
- On concrete and gross concrete surfaces.
- On cement based pre-cast coated surfaces.
- On surface hardener applied surfaces.
- On FH STAMP applied surfaces.
It provides long term protection, dust-free property, surface resistance and aesthetic appearance with penetrating deeply into the concrete pores and aggregate structure.
Content Color Density Flash Point Application Temperature Service Temperature Drying Time HS Code | Solvent based acrylic resin Transparent 0,92 g/cm3 +25°C +5°C to +25°C -20°C to +80°C 2 hours 3208.90.91.00.23 |
Preparation of Substrate
Application surface must be cleaned off all contaminates such as dust, dirt, rust etc. and washed with pressure water. Surface must be dry before application.
Application Method
FH SHINER is ready to use. Product should be applied on the dry surface for 2 or 3 coats with using brush, roller or metallic spray gun. Re-coat time is 2 or 3 hours according to weathering conditions. Application must be done in a well ventilated area and using protective gloves and goggles.
0,200 – 0,250 lt/m2 for 3 layers.
30 lt plastic drum
12 months in original, unopened package.
Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.
Clean tools and equipment with industrial type solvents immediately after use. Dried material can only be removed mechanically.
