EPOX PR 100 is an epoxy based, two component and solvent-free impregnating primer.
It is suitable for using in BAUMERK brand name floor coating systems as interior and exterior surface primer. Also, it can be used as repair and grout mortar after mixing with aggregate.
Low viscosity
Solvent-free
High penetration ability and adhesion performance.
Content Density Viscosity Adhesion Strength Shore D Hardness Pot Life Application Temperature Final Curing Time HS Code | Epoxy based 1,00 – 1,15 g/cm3 (at 23°C) (DIN EN ISO 2811-1) 500-1.500 mPas (at 23°C) (DIN 2555) >1,5 N/mm2 (ISO 4624) >75 (DIN 53505) 25-40 minutes (at 23°C, 200 g) Between +10°C and +30°C 7 days 3214.90.00.00.19 |
Preparation of Substrate
Application surface must be cleaned off the contaminant such as dirt, dust, rust, oil etc. Application surface must be scraped to be ready for application.
Application Method
Component A and B should be mixed by low speed mixture for 3-4 minutes until homogenous mixture is obtained. Mixture should be applied on the surface with using a trowel or roller. EPOX PR 100 can be also used as repair mortar after mixed with aggregate. Application must be protected from direct sun light, wind, frost and rain at least 1 day.
200-400 g/m2 for each layer.
13,3 kg component A + 6,7 kg component B = 20 kg set
12 months in original, unopened package.
Store in dry area between +10°C and +35°C. Protect from heat, freezing and direct sunlight.
Clean tools and equipment with thinner immediately after use. Dried material can only be removed mechanically.